We will reply to your message within an hour.
More
In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.
This material suppresses static charges to prevent dust from building up.
Compared to our standard UHMW polyethylene, these sheets and bars hold up better to scuffs and scrapes in high-speed, high-precision, and high-impact applications—such as conveyor equipment, chute liners, and machine guards. Also known as Tivar HPV.
Often used in high-speed, high-precision, and high-impact applications, such as conveyor rollers and bearings, these rods stand up to scratches and scuffs better than our standard UHMW polyethylene rods. Also known as Tivar HPV.
Also known as Tivar H.O.T., this material lasts up to 10 times longer in high-temperature applications than standard UHMW.
This oil-filled material is self-lubricating for an extra-slippery surface.
If a chip of this material breaks off, it can be located by metal detectors to reduce contamination risks.
Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.
The addition of PTFE provides a more slippery, wear-resistant surface than standard Delrin® acetal resin. It’s commonly fabricated into pump components, gears, and bearings.
An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.
Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.
This cast nylon 6 material is easier to machine than other types of nylon. It’s comparable to Nylatron and Nycast.
Practically nonabsorbent, HDPE won't swell when exposed to moisture. It is denser and more rigid than LDPE, plus it's more chemical resistant.
Made of PVC Type 2 plastic, these 90° angles resist impact and chemicals.
Because ABS maintains its toughness even after thermoforming, it’s often made into storage cases, tote trays, equipment housings, and protective gear.
Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.
Package food, textiles, and other products in wet environments. This film won’t absorb or swell from water.
One of the softest and most flexible plastics we offer, LDPE is more formable than HDPE.
A layer of soft LDPE is sandwiched between two thin layers of aluminum for strength and rigidity.
Polycarbonate maintains good impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.
The addition of glass fibers to this polycarbonate increases tensile strength for use in structural applications.
Polyester resists swelling in wet environments.
These black polyester rods protect from UV rays better than off-white polyester. Strong and semi-rigid, they won't swell in moist environments, so they're often made into valves, pump components, and spacers.
These black polyester sheets protect from UV rays better than off-white polyester. Strong and semi-rigid, they won't swell in moist environments, so they're often made into pump components and spacers.
When moisture-resistant polyester is combined with PTFE, the result is this self-lubricating material. It’s also called Hydex and PBT.
Often fabricated into signs, packaging, and light duty housings, polystyrene is easy to thermoform.
Known for its electrical insulating properties, this polystyrene is often used for cable connectors, electrical housings, and in microwave applications. It is also known as Rexolite.
A satin texture on one side of these PETG sheets makes them semiclear. You can see light from the other side, but not detailed shapes. They are more resistant to scratching and glare than standard PETG.
Made with Teflon® PTFE resins, these sheets and bars surpass most plastics when it comes to chemical resistance and performance in extreme temperatures.
Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.
This film is made with virgin Teflon® PTFE resins. It can handle extreme temperatures and resists most solvents.
This glass-filled PTFE is more rigid than standard PTFE for increased durability in high-stress applications.
Manufactured from Rulon PTFE, a PTFE that's modified with filler material for a super-slippery, impact-resistant surface that resists wear.
Not only does PEEK provide superior wear resistance in repetitive processes, it is also resists wear caused by abrasion. PEEK can be used as a lightweight substitute for metal parts in chemical-processing applications.
Common in food and pharmaceutical plants, these PEEK bars help you identify contaminated batches.
Often used in food and pharmaceutical plants, these PEEK rods help you prevent contaminated products from leaving your facility.
Often used for circuit-breaker housings, manifolds, and semiconductor components, Ultem PEI offers excellent electrical-insulating properties.
Just as chemical resistant as PTFE, yet FEP offers greater impact strength. Use it to make valve components and gaskets.
Stronger than PTFE, PVDF offers good chemical resistance. Comparable to Kynar and Solef, it’s widely used for pump parts, tank liners, and seals.
Widely used to make parts that require autoclaving, polysulfone is a hard, rigid material that’s easy to machine and thermoform. It maintains its physical properties when heated, even when exposed to steam.
When excellent chemical resistance is combined with an ability to hold tight tolerances, the result is PPS—a material that’s widely machined into parts for chemical-processing applications. It is comparable to Techtron and Ryton.
Often used as gaskets and bearings, this slippery-surface material absorbs virtually no moisture. PCTFE is equivalent to Kel-F and Neoflon.
Offering excellent resistance to shock, PPSU is frequently fabricated into vehicle parts and machine components that are subject to vibration. It withstands higher temperatures than polysulfone and can handle repeated autoclaving cycles.
Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.
At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.
Because PVC resists acids and alkalies, it is often used in tanks and chemical-processing applications where visibility is essential.
PETG can be formed into complex shapes without sacrificing durability.
Print tough, long-lasting parts that won’t scratch or wear out from constant motion and friction, such as gears and washers.
These pellets resist swelling when exposed to water, making them suitable for use in wet environments. Melt and mold them into desired shapes.
Absorbing impact without cracking or breaking, these plastic pellets are molded into parts that endure bumps, scrapes, and falls.