We will reply to your message within an hour.
Also known as spherical washers, these consist of a male and female washer that, when nested, swivel slightly to compensate for tolerance variations and uneven surfaces.
Also known as spherical washers, these consist of a metric male and female washer that, when nested, swivel slightly to compensate for tolerance variations and uneven surfaces.
Commonly called beveled washers, these are tapered to fit inside an I-beam's flange to provide a parallel bearing surface.
Commonly called beveled washers, these metric washers are tapered to fit inside an I-beam's flange to provide a parallel bearing surface.
Tapered to fit in a U-channel, these washers create a parallel bearing surface.
Compared to our general purpose washers, these have exaggerated diameters and/or thicknesses for covering oversized holes or for use as spacers and levelers.
Compared to our general purpose washers, these have exaggerated diameters and/or thicknesses. Use them to cover oversized holes, hold heavy fastening loads, or as spacers and levelers.
Punch a hole to create a custom washer.
Also known as backup washers, these are for use with blind rivets for extra support when fastening into soft material.
Ridges keep these aluminum shims from sliding apart when stacked. Designed for aligning shafts and axles, they support heavier loads than plastic tapered shims.
The slot lets you install these rigid shims around screws.
Ridges keep these shims from sliding apart when stacked.
Easily snap off any excess to get the length you need.
Keep slotted shims in a variety of thicknesses on hand with these sets, which are color-coded by thickness for easy identification. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.
These shims are color-coded by thickness for easy identification. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.
The slot lets you insert, remove, and adjust the shims without disassembling your machinery.
Be prepared with slotted shims in a variety of thicknesses. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.
Use these thick shims to align cabinets, doors, and windows, or for other rough leveling.
These shims are scored so you can easily shorten them to the length you need. Designed to fit around screws, they are commonly used in window, door, and cabinet installations.
Align cabinets, doors, and windows with these shims. The horseshoe design fits around screws.
Clips on these shims hold them together when stacked, and they are color coded by thickness for easy identification. Designed to fit around screws, they are commonly used in window, door, and cabinet installations.
These shims are color-coded by thickness for easy identification. The horseshoe design fits around screws.
Slide these shims behind your door’s hinge to align it in the jamb.
Use a single shim on feet or positioning arms that are secured with multiple fasteners. The slots let you insert, remove, and adjust the shims without disassembling your machinery. Also known as finger shims.
Each set includes a variety of different thicknesses, so you can use multiple shims together to create a specific thickness or make minor adjustments.
Precisely align, level, and adjust spacing on fasteners and shafts with these shims.
Be prepared with ring shims in a variety of thicknesses. These shims fit around fasteners and shafts to precisely align, level, and adjust spacing.
Also known as machinery bushings, these shims have an oversized OD to create a larger bearing surface for reduced wear between moving parts.
These shims are made of layers of metal bonded with adhesive. Remove layers with a utility knife until you get the thickness you need.
For a snug fit around a shaft, the ID of these shims is held to a tighter tolerance than other round shims.
Precisely align, level, and adjust spacing on fasteners, shafts, and machinery with these shims, which are color-coded by thickness for easy identification.
Be prepared with ring shims in a variety of thicknesses. These shims are color-coded by thickness for easy identification.
Also called tolerance rings, these rings are for use in stamped, molded, or worn housings to form a tight hold on the bearings.
Slide these shims under the screw head to shorten the shoulder length.
Spin these shims onto screw threads to extend the shoulder length.
Adjust spacing between bearings and other components on shafts. These shims are sized to fit the outer rim of a bearing.
Precisely shaped to fit snugly on keyed shafts, these shims align, level, and space components. Because of their tight fit, they also help components rotate in unison with the shaft.
Be prepared with shims in a variety of thicknesses. Also known as arbor spacers, these shims are notched to fit over keyed shafts.
Use these round shims as they are, or punch out the middle to create the ID you need.
Place these shims under sharpened dies to restore their original height and extend their life.
These shims are shaped to fit over D-profile shafts. Use them to precisely align, level, and adjust spacing.
Be prepared with shims in a variety of thicknesses. These shims are shaped to fit over D-profile shafts. Use them to precisely align, level, and adjust spacing.
The textured surface of these thick shims keeps them from sliding apart when stacked. Use them to align cabinets, doors, and windows, or for other rough leveling.
These thick shims are scored to make size adjustments easy—break off the excess shim for a custom fit around fasteners or corners. Use them to align cabinets, doors, and windows, or for other rough leveling.
Send us a drawing, and we'll cut your custom shim.
Send us a drawing, and we'll cut your custom shim. Shims are made of layers of metal bonded with adhesive; remove layers with a utility knife until you get the thickness you need.
Level dies, plates, presses, and other machine tools—this shim tape conforms to curves and uneven surfaces.
Place these shims under sharpened dies to restore their original height and extend the life of the dies.
Slide onto a shoulder screw to shorten the length of the shoulder.
Spin these tight-fitting shims onto your screw's threads to lengthen the shoulder.
Use round shims to precisely align, level, and adjust spacing on shafts and machinery.
Use these paper shims to create a gap while welding, then spray them with water and they instantly melt away.