We will reply to your message within an hour.
Cut threads into most metal and plastic.
Use the extra-long shank to thread deep and hard-to-reach holes.
Tap threads for left-hand threaded fasteners.
Sized to cut oversized threads, these tools are often used to tap holes where the threads will shrink due to heat treatment or plating.
Often used for thread repair and occasional hand tapping, these carbon steel taps can thread holes in most metal and plastic, but they have a shorter tool life than standard taps.
Use these taps on hard and abrasive material, such as heat-treated metal, nickel, and fiberglass.
Insert these taps directly into drills, power screwdrivers, and other tools that accept a 1/4" hex shank.
Drill holes and cut threads without switching tools.
With a taper chamfer and bottoming chamfer at opposite ends, these taps start threads easily and are good for threading close to the bottom of closed-end holes.
Tap threads into hardened steel and iron. These cobalt steel taps have straight flutes for high durability.
Create threads sized for pipe and conduit.
With an extra-long shank, these taps have extended reach for tapping deep and hard-to-reach areas in pipe and conduit.
Tap left-hand threads for pipe and conduit.
Use these carbon steel taps for thread repair and occasional tapping of pipe and conduit. They can tap threads into most metal and plastic, but they have a shorter tool life than standard taps.
Also known as interrupted-thread taps, these have extra space between the cutting threads, so large chips fall without packing and high amounts of lubricant can flow between the tap and the workpiece.
Also known as short-projection taps, these have fewer tapered threads at the tip than standard pipe taps, so you don't have to drive them as deep to produce full threads.
With a taper chamfer on one threading end and a bottoming chamfer on the other, these pipe and conduit taps can start threads easily, and they are able to thread close to the bottom of closed-end holes.
The cutting teeth are shaped to cut smooth threads in soft pipe and conduit material.
Use these taps on hardened steel pipe and conduit.
Cut threads in PG thread sizes commonly used for European conduit.
Form general purpose Acme threads.
Produce metric threads that meet Japanese Industrial Standards.
Add threads to holes in preparation for installing helical inserts.
Tap the unique size needed for garden hose thread (GHT) connections.
The coil-style threads produced by these taps are shallower and more widely spaced than standard thread sizes. Use them for quick threading action with compatible fasteners.
Also known as National Gas Outlet (NGO) taps, these tap threads in sizes used for compressed gas cylinders and valves.
Use these high-speed steel taps to cut and repair threads in the sizes needed to accept spark plugs.
Attach these tools to a socket wrench to restore rusted and damaged spark plug threads in two common sizes.
These taps are for use on most metal and plastic.
For start-to-finish tapping of left-hand threads, these sets include one taper-, one plug-, and one bottoming-chamfer tap.
Multiple tap sizes allow tapping a range of hole diameters. Connect these taps directly to drills, power screwdrivers, and other tools that accept a 1/4" hex shank.
Create pipe and conduit threads in a range of hole diameters.
Drill and tap a variety of hole sizes. These taps and drill bits are for use on metal and plastic.
All taps and drill bits have a hex shank for direct connection to tools such as drills and power screwdrivers.
Use a single set for many sizes of internal and external threads. All sets include tap and die wrenches.
Cut and repair threads and drill holes in many different sizes. Tap and die wrenches are included.
Repair screw threads in a wide range of sizes.