About Nuts, Materials, and Finishes
More
Tap and Drill Bit Stands
Keep taps and drill bits organized. All holes are labeled with sizes. Taps and drill bits are not included.
No. of Taps Stored | Holds Tap Sizes | No. of Drill Bits Stored | Holds Drill Bit Sizes | Lg. | Wd. | Ht. | Material | Each | |
For Taps and Drill Bits | |||||||||
---|---|---|---|---|---|---|---|---|---|
16 | One each of M2, M3; Two each of M4, M5, M6, M8, M10, M12, M14 | 25 | Two each of 3.3 mm, 4.5 mm, 12 mm; One each of 1.8 mm, 2.4 mm, 2.5 mm, 3.4 mm, 4.2 mm, 5 mm, 5.25 mm, 5.5 mm, 6.6 mm, 6.8 mm; 7 mm, 8.5 mm, 8.8 mm, 9 mm, 10.2 mm, 10.8 mm, 12.5 mm, 14 mm, 16 mm | 7" | 4 1/2" | 1 11/16" | Plastic | 0000000 | 000000 |
26 | Two each of Nos. 2, 3, 4, 5, 6, 8, 10, 12; Two each of 1/4", 5/16", 3/8", 7/16", 1/2" | 39 | Two each of 50 ga., 33 ga., 29 ga.; One each of 47 ga., 45 ga., 44 ga., 43 ga., 42 ga., 39 ga.; 38 ga., 37 ga., 36 ga., 30 ga., 28 ga., 25 ga., 21 ga., 19 ga., 16 ga., 14 ga., 11 ga., 7 ga., 3 ga.; One each of F, I, Q, U; Two of 5/16"; One each of 7/32", 1/4", 3/8", 25/64", 27/64", 7/16", 29/64", 1/2" | 7 3/8" | 4 11/16" | 1 11/16" | Plastic | 0000000 | 00000 |
Thread-Forming Locknuts
These nylon locknuts form threads as they're tightened to resist vibration. They're not reusable. Made from nylon 6/6, they're chemical resistant, nonconductive, and lightweight.
For technical drawings and 3-D models, click on a part number.
Thread Size | Wd. | Ht. | Temp. Range, °F | Color | Pkg. Qty. | Pkg. | |
Nylon 6/6 Plastic | |||||||
---|---|---|---|---|---|---|---|
2-56 | 3/16" | 1/16" | -40° to 185° | White | 100 | 000000000 | 000000 |
4-40 | 1/4" | 3/32" | -40° to 185° | White | 100 | 000000000 | 00000 |
6-32 | 5/16" | 7/64" | -40° to 185° | White | 100 | 000000000 | 00000 |
8-32 | 21/64" | 1/8" | -40° to 185° | White | 100 | 000000000 | 00000 |
10-24 | 23/64" | 9/64" | -40° to 185° | White | 100 | 000000000 | 00000 |
10-32 | 23/64" | 9/64" | -40° to 185° | White | 100 | 000000000 | 00000 |
1/4"-20 | 27/64" | 15/64" | -40° to 185° | White | 100 | 000000000 | 00000 |
Clamp-On Drill Guides
Drill precise holes without building a fixture. Clamp the jig onto your material and lift and turn the turret to select the hole size you need. Use the graduations to set the jig to the centerline of your workpiece.
For Drill Bit Size | For Drill Bit Size Decimal Equivalent | Max. Opening Wd. | Lg. | Wd. | Ht. | Material | Each | |
3/16", 1/4", 5/16", 3/8", 7/16", 1/2" | 0.1875", 0.25", 0.3125", 0.375", 0.4375", 0.5" | 4" | 7 1/8" | 3 1/2" | 2 1/8" | Steel and Nylon Plastic | 0000000 | 000000 |
Drill Bit Cases
Store and organize drill bits so they stay in good working condition and don't go missing. These cases have individually marked holes for each size in your set.
Plastic cases have screw-on lids to block out moisture. Compared to steel cases, they're lighter, and they resist rust and dents. Clip them onto your belt to take with you on the job.
For technical drawings and 3-D models, click on a part number.